Saturday, November 18, 2017
   
Text Size

Search

Search Keyword bolt Total: 8 results found.

Search Result

  1. UTC Universal Transmission Crossmember

    Category: Products/DVS Engineered Products

    ... clearance as needed Adjusts to imperfections in the chassis Can be bolted or welded in place With bolt in installation, can be re-used if the transmission is converted to something else in the ...
    Monday, 14 September 2009
  2. Motor Mounts

    Category: Products/DVS Engineered Products

        These motor to frame mounts are designed especially to mount a 4.6 Ford modular motor into the 67-70 Mustang chassis using the original style front suspension. These bolt in to the existing ...
    Monday, 31 August 2009
  3. IRS For Vintage Mustangs

    Category: Products/DVS Engineered Products

    ... rear suspension into the 1967-70 Ford Mustang and Cougar Late model ride and handling for your vintage Mustang! Easy bolt-in installation - no welding required. Rear wheel disc brakes! ...
    Thursday, 27 August 2009
  4. IRS Subframe Cradle Drop

    Category: Uncategorised Content

    ... to the rack. There is a hole on each side of the cradle. I use a long bolt and use these two holes to help align the cradle. Make sure you get the inside/outside ...
    Wednesday, 20 January 2010
  5. Lowered Expectations

    Category: Uncategorised Content

    ... same location. By keeping the mount and alignment points the same the system will work as a direct bolt-in for the current mounting kit. Photo on the right shows the "standard" ...
    Monday, 14 September 2009
  6. Attention 65-66 Mustang Owners

    Category: Uncategorised Content

    ... amounts of tire under this car with the new flares, our first goal was to see if our kit will physically bolt into the 65-6 chassis. Answer - YES! The frame rails and position in the rear of the chassis ...
    Monday, 14 September 2009
  7. Mac Strut Update

    Category: Blog/Blog

    ... plates.  There are a lot of CC systems out there, we like the MM version for two reasons. 1. - They are four bolt and we like extra bolts in our plates and 2. - MM gets it when it comes to their instruction ...
    Wednesday, 14 May 2008
  8. Canton Front Sump Oil Pans Are Here!

    Category: Blog/Blog

    ... includes 5 trap doors, bolt in slosh baffle, provision for a temperature sensor, magnetic drain plug and a provision for a dipstick tube.  Canton is also offering pickup tubes for both 2V and 4V applications.  ...
    Tuesday, 28 February 2006
Search Parameters
Search Only: