Monday, August 21, 2017
   
Text Size

Search

Search Keyword shock Total: 6 results found.

Search Result

  1. Motor Mounts

    Category: Products/DVS Engineered Products

    ... Installing the 4.6 engine in 67-70 Mustang requires the modification of the shock towers to make clearance for the wider engine. These mounts will fit 65-6 Mustangs with modifications, but the stock suspension ...
    Monday, 31 August 2009
  2. IRS For Vintage Mustangs

    Category: Products/DVS Engineered Products

    ...  Normal wear items available from your local Ford dealer!  Shock absorbers can be rebuilt! Latest technology - wide selection of axle ratios, brake assemblies and aftermarket parts.  ...
    Thursday, 27 August 2009
  3. Lowered Expectations

    Category: Uncategorised Content

    ...  Lowered subframe unit Special lowered shocks Optional spring rates if necessary Lowered IRS Notes: Ground Clearance - With the non-altered cradle the ride height is about 3.75 ...
    Monday, 14 September 2009
  4. Attention 65-66 Mustang Owners

    Category: Uncategorised Content

    ... the rear bracket and the coil over shock - just as you do with the later 67-70 installations (we note this for a reason). No clearance problems on the inside of the wheel well. Our alignment ...
    Monday, 14 September 2009
  5. Mac Strut Update

    Category: Blog/Blog

    ... coil over kits.  Shown above is the COP-2 coil over for the single adjustable Koni shocks mounted on this 67.  Depending on your strut choice, Maximum probably has a conversion for it. 99-04 Caster Camber ...
    Wednesday, 14 May 2008
  6. Canton Front Sump Oil Pans Are Here!

    Category: Blog/Blog

    ... sump pickup tubes   Note: To use the Canton front sump pan in a typical 67-70 Mustang Application,  you will need to cut the shock towers of your car back to fit the late model motor.  See how to do ...
    Tuesday, 28 February 2006
Search Parameters
Search Only: