Tuesday, June 27, 2017
   
Text Size

Search

Search Keyword right Total: 8 results found.

Search Result

  1. IRS For Vintage Mustangs

    Category: Products/DVS Engineered Products

    ... adjustable shocks can be adjusted without removing them from the car! Hypercoil coil springs More top race proven parts from right here in the Midwest. 500 pound rate springs Differential ...
    Thursday, 27 August 2009
  2. IRS Subframe Cradle Drop

    Category: Uncategorised Content

    ... removing 2 inches from the rear mounting arms and rotating and relocating the front mount points to match. This is best done in a fixture that holds the cradle in the right angle. After the cradle is cut ...
    Wednesday, 20 January 2010
  3. Lowered Expectations

    Category: Uncategorised Content

    ... same location. By keeping the mount and alignment points the same the system will work as a direct bolt-in for the current mounting kit. Photo on the right shows the "standard" ...
    Monday, 14 September 2009
  4. Attention 65-66 Mustang Owners

    Category: Uncategorised Content

    ... the kit bolt together properly. Inside, this drip rail on the early car (middle photo) is right in our way, so we'll have to make a longer insert to clear the strengthening rib. The final photo is the ...
    Monday, 14 September 2009
  5. IRS Facts, Fiction, and Useless (and Useful) Trivia

    Category: Uncategorised Content

    ...  Cobra IRS on the left T-bird IRS on the right    ...
    Monday, 14 September 2009
  6. Restorations

    Category: Uncategorised Content

    (click on photos to enlarge) The only way to do a restoration that will please everybody is to do it right the first time, and doing it right the first time means knowing the car you are restoring. ...
    Monday, 31 August 2009
  7. Mac Strut Update

    Category: Blog/Blog

    ... style blower. 2. Because of the blower snout, we had to move the engine back approx. four inches, which places it right up against the firewall.  This caused interference with the stock A/C outlets, ...
    Wednesday, 14 May 2008
  8. Canton Front Sump Oil Pans Are Here!

    Category: Blog/Blog

    ... restoration at DVS' facility.   Ahh, the shop is in full swing right now.  Although we can't talk about much of what we're doing, we do have some neat stuff coming up very soon including:   Mac ...
    Tuesday, 28 February 2006
Search Parameters
Search Only: