Wednesday, August 23, 2017
   
Text Size

Search

Search Keyword mounts Total: 8 results found.

Search Result

  1. Motor Mounts

    Category: Products/DVS Engineered Products

        These motor to frame mounts are designed especially to mount a 4.6 Ford modular motor into the 67-70 Mustang chassis using the original style front suspension. These bolt in to the existing ...
    Monday, 31 August 2009
  2. IRS For Vintage Mustangs

    Category: Products/DVS Engineered Products

    ... cable, line connector and cable mounts. All prices and specifications are subject to change without notice. Prices do not include shipping. Contact Dave Stribling Restorations for more information. ...
    Thursday, 27 August 2009
  3. IRS Subframe Cradle Drop

    Category: Uncategorised Content

    ... rotation of the front mounts. Mark right in front of the ABS hold down hole and remove approx 3/8 inch from the cradle Elbow ready to be re-welded Be ...
    Wednesday, 20 January 2010
  4. Lowered Expectations

    Category: Uncategorised Content

    ... 3/4 of an inch to spare! Road clearance is gained by changing the angle of the front mount to near horizontal. The mounts are flat and not angling up towards ...
    Monday, 14 September 2009
  5. Attention 65-66 Mustang Owners

    Category: Uncategorised Content

    ... amounts of tire under this car with the new flares, our first goal was to see if our kit will physically bolt into the 65-6 chassis. Answer - YES! The frame rails and position in the rear of the chassis ...
    Monday, 14 September 2009
  6. IRS Facts, Fiction, and Useless (and Useful) Trivia

    Category: Uncategorised Content

    Q. - So what's the difference in the 99, 2000 R, 2001-2 and 2003-2004 Units? A. - Here's what we know so far: 1999 - small 28 spline axles, 3.27 gear, posi center, soft rubber in subframe mounts. ...
    Monday, 14 September 2009
  7. Mac Strut Update

    Category: Blog/Blog

    ... sit low enough so the blower will clear a stock hood.  On our 67 vehicle, we are using a Mac strut conversion, and with the stock 03 engine mounts we cleared the Shelby hood - just barely.     The ...
    Wednesday, 14 May 2008
  8. Canton Front Sump Oil Pans Are Here!

    Category: Blog/Blog

    ... sump oil pan, universal dipstick tube, pickup tube, oil pan gasket, oil filter relocation kit, 67-70 motor mounts, UTC universal transmission crossmember, transmission bushing.   Notes: Requires modification ...
    Tuesday, 28 February 2006
Search Parameters
Search Only: