Monday, October 23, 2017
   
Text Size

Search

Search Keyword chassis Total: 8 results found.

Search Result

  1. UTC Universal Transmission Crossmember

    Category: Products/DVS Engineered Products

    ... to install all popular Ford transmissions into vintage Mustang and other Ford chassis with ease. The patented design allows 6 inches of adjustment in all three axis to allow for proper fit at the correct ...
    Monday, 14 September 2009
  2. Motor Mounts

    Category: Products/DVS Engineered Products

        These motor to frame mounts are designed especially to mount a 4.6 Ford modular motor into the 67-70 Mustang chassis using the original style front suspension. These bolt in to the existing ...
    Monday, 31 August 2009
  3. IRS Subframe Cradle Drop

    Category: Uncategorised Content

    ... ground clearance and better suspension geometry in the vintage Mustang chassis. The following is only a guideline and should only be undertaken by certified welders. Lowering the IRS cradle requires ...
    Wednesday, 20 January 2010
  4. Lowered Expectations

    Category: Uncategorised Content

    ... the chassis. Road clearance can be improved up to two inches! By raising the subframe in the chassis, the suspension travel is also improved. The lowered system consists of the following items: ...
    Monday, 14 September 2009
  5. Attention 65-66 Mustang Owners

    Category: Uncategorised Content

    Q. - Will your kit fit the 1965-1966 Mustang chassis? A. - YES and NO. 1965 Mustang Fastback with a 2000 Cobra R Independent rear suspension. This sweet ride is owned by fellow Hoosier Dale Irwin ...
    Monday, 14 September 2009
  6. Mac Strut Update

    Category: Blog/Blog

    ... retain the integrity of the original chassis.  In fact, the original Boss drivetrain is sitting over in a corner, and can be re-installed if the owner so wishes! Take a look at the web page on this latest ...
    Wednesday, 14 May 2008
  7. Canton Front Sump Oil Pans Are Here!

    Category: Blog/Blog

    ... to the shock towers to fit the 67-70 chassis.  Engine requires 4.6 Mustang style motor mount bushings. Will not fit stock 65-66 style Mustang suspension. Intro Kit Price $899 Oil pan Kits   FSP-1    ...
    Tuesday, 28 February 2006
  8. Products

    Category: Section

    DVS Restorations is developing commercial version of all the custom built products needed to install late model components into the early Mustang chassis. DEALER'S NOTE - if you are interested in dealer ...
Search Parameters
Search Only: